School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.

  • Unit Title

    Electrical Engineering 1A
  • Unit Code

    ENS1162
  • Year

    2022
  • Enrolment Period

    1
  • Version

    2
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
  • Unit Coordinator

    A/Prof Douglas Kian CHAI

Description

This unit introduces the fundamental principles of electrical and electronic engineering. Students will learn basic circuit analysis techniques and the background theories needed to understand the operation of simple electrical circuits and systems. The principles of digital systems are also introduced.

Equivalent Rule

Unit was previously coded ENS1153

Learning Outcomes

On completion of this unit students should be able to:

  1. Apply basic concepts of electrical circuit description, simplification and analysis.
  2. Analyse simple electrical circuits and systems.
  3. Undertake problem identification, formulation, solution and solution verification of small-scale DC electrical circuits and small-scale digital systems.
  4. Demonstrate theoretical and practical experience in building simple circuits and testing the operation of those circuits.

Unit Content

  1. Fundamentals – powers of 10, engineering notation, metric prefixes, charge, current, voltage, resistance.
  2. Circuits – elements, constructions and measurements.
  3. Resistors – Ohm’s law, power rating, series and parallel.
  4. Circuit analysis – Kirchhoff’s current law, Kirchhoff’s voltage law, voltage dividers, current dividers.
  5. Capacitors and inductors – voltage-current characteristics, series and parallel, DC steady-state behaviour.
  6. AC circuits – sinusoidal voltage and current, angular measurement and phase, complex numbers, RC and LC circuits.
  7. Diodes – ideal and real diode characteristics and models, simple diode circuits, rectification, light emitting diodes.
  8. Amplifiers – models, inverting, non-inverting, voltage follower.
  9. Digital fundamentals – number systems, boolean algebra, truth tables, logic gates.
  10. Power systems and transmission lines – sinusoidal waveforms, AC power, three-phase systems, transformers.

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

ON CAMPUS
TypeDescriptionValue
AssignmentProblem sets30%
Laboratory WorkLaboratory work and practical test20%
ExaminationEnd of semester examination50%
ONLINE
TypeDescriptionValue
AssignmentProblem sets30%
ExerciseCircuit simulation exercises20%
ExaminationEnd of semester examination50%

Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS1162|2|1

School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.

  • Unit Title

    Electrical Engineering 1A
  • Unit Code

    ENS1162
  • Year

    2022
  • Enrolment Period

    2
  • Version

    2
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
  • Unit Coordinator

    A/Prof Douglas Kian CHAI

Description

This unit introduces the fundamental principles of electrical and electronic engineering. Students will learn basic circuit analysis techniques and the background theories needed to understand the operation of simple electrical circuits and systems. The principles of digital systems are also introduced.

Equivalent Rule

Unit was previously coded ENS1153

Learning Outcomes

On completion of this unit students should be able to:

  1. Apply basic concepts of electrical circuit description, simplification and analysis.
  2. Analyse simple electrical circuits and systems.
  3. Undertake problem identification, formulation, solution and solution verification of small-scale DC electrical circuits and small-scale digital systems.
  4. Demonstrate theoretical and practical experience in building simple circuits and testing the operation of those circuits.

Unit Content

  1. Fundamentals – powers of 10, engineering notation, metric prefixes, charge, current, voltage, resistance.
  2. Circuits – elements, constructions and measurements.
  3. Resistors – Ohm’s law, power rating, series and parallel.
  4. Circuit analysis – Kirchhoff’s current law, Kirchhoff’s voltage law, voltage dividers, current dividers.
  5. Capacitors and inductors – voltage-current characteristics, series and parallel, DC steady-state behaviour.
  6. AC circuits – sinusoidal voltage and current, angular measurement and phase, complex numbers, RC and LC circuits.
  7. Diodes – ideal and real diode characteristics and models, simple diode circuits, rectification, light emitting diodes.
  8. Amplifiers – models, inverting, non-inverting, voltage follower.
  9. Digital fundamentals – number systems, boolean algebra, truth tables, logic gates.
  10. Power systems and transmission lines – sinusoidal waveforms, AC power, three-phase systems, transformers.

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

ON CAMPUS
TypeDescriptionValue
AssignmentProblem sets30%
Laboratory WorkLaboratory work and practical test20%
ExaminationEnd of semester examination50%
ONLINE
TypeDescriptionValue
AssignmentProblem sets30%
ExerciseCircuit simulation exercises20%
ExaminationEnd of semester examination50%

Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS1162|2|2