School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.

  • Unit Title

    Mechanics of Solids
  • Unit Code

    ENS3190
  • Year

    2022
  • Enrolment Period

    1
  • Version

    3
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
    Online
  • Unit Coordinator

    Prof Laichang ZHANG

Description

This unit introduces the fundamental concepts of mechanics of deformable solids in equilibrium. Students will develop their understanding of the physical performance of solid structural members, which are associated with a variety of structural systems in civil, mechanical, chemical, aeronautical, and biomedical engineering.

Prerequisite Rule

Students must pass 1 units from ENS1101, SCP1111

Learning Outcomes

On completion of this unit students should be able to:

  1. Analyse and estimate stress and strain in structural members subjected to tension, compression, torsion, bending and transverse shear.
  2. Analyse beams with composite sections under bending.
  3. Calculate basic parameters related to the stability of columns.
  4. Calculate basic requirements for the design of structural elements.
  5. Calculate deformation of structural members subjected to tension, compression, and torsion.
  6. Calculate internal actions in determinate structural components using the equations of force equilibrium.
  7. Calculate internal actions in indeterminate structural components under tension, compression, and torsion by applying compatibility conditions and material constitutive relationships.
  8. Demonstrate knowledge of stability requirements for members under compression.
  9. Demonstrate knowledge of the engineering behaviour of deformable structural members in equilibrium.

Unit Content

  1. Axially loaded members; stress concentration; allowable stress and factor of safety.
  2. Basic concepts of deformation, generalised Hookes law, elastic and inelastic deformations.
  3. Bending stress in composite beams; selection of economic beam sections.
  4. Buckling and stability of columns.
  5. Equilibrium of deformable bodies; centroids and moments of area.
  6. Pure bending and non-uniform bending; flexural stress in doubly symmetric beams.
  7. Relationship between load, shear force and bending moment; shear force and bending moment diagrams.
  8. Shear stress in beams; shear flow in built-up beams.
  9. Stress and strain analysis, and Mohrs circle.
  10. Stresses in cylindrical and spherical shells.
  11. Torsion, stress concentration; transmission of power.
  12. Unsymmetrical bending; shear-centre concept; design of beams and shafts under combined loading.

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

ON CAMPUS
TypeDescriptionValue
TestQuizzes/Tests30%
Laboratory WorkLaboratory performance and report20%
Examination ^End of semester examination50%
ONLINE
TypeDescriptionValue
TestQuizzes/Tests30%
ExerciseVirtual laboratory activities20%
Assignment ^Summative assessment of unit content50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS3190|3|1

School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.

  • Unit Title

    Mechanics of Solids
  • Unit Code

    ENS3190
  • Year

    2022
  • Enrolment Period

    2
  • Version

    4
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
    Online
  • Unit Coordinator

    Prof Laichang ZHANG

Description

This unit introduces the fundamental concepts of mechanics of deformable solids in equilibrium. Students will develop their understanding of the physical performance of solid structural members, which are associated with a variety of structural systems in civil, mechanical, chemical, aeronautical, and biomedical engineering.

Prerequisite Rule

Students must pass 1 units from ENS1101, SCP1111

Learning Outcomes

On completion of this unit students should be able to:

  1. Explain the equilibrium state and behaviour of deformable structural members subject to tension, compression, bending and torsion.
  2. Calculate internal actions in determinate structural components, using the equations of equilibrium.
  3. Calculate internal actions in indeterminate structural components under tension, compression, and torsion, by applying compatibility conditions and material constitutive relationships.
  4. Analyse structural members (including composite beams) within a structural design, by estimating the impact of stress and strain on the member subject to tension, compression, torsion, bending and transverse shear.
  5. Calculate basic parameters related to the stability of columns in structural design.
  6. Calculate basic parameters related to the stability of columns in structural design.

Unit Content

  1. Axially loaded members; stress concentration; allowable stress and factor of safety.
  2. Basic concepts of deformation, generalised Hookes law, elastic and inelastic deformations.
  3. Bending stress in composite beams; selection of economic beam sections.
  4. Buckling and stability of columns.
  5. Equilibrium of deformable bodies; centroids and moments of area.
  6. Pure bending and non-uniform bending; flexural stress in doubly symmetric beams.
  7. Relationship between load, shear force and bending moment; shear force and bending moment diagrams.
  8. Shear stress in beams; shear flow in built-up beams.
  9. Stress and strain analysis, and Mohrs circle.
  10. Stresses in cylindrical and spherical shells.
  11. Torsion, stress concentration; transmission of power.
  12. Unsymmetrical bending; shear-centre concept; design of beams and shafts under combined loading.

Learning Experience

ON-CAMPUS

Students will attend on campus classes as well as engage in learning activities through ECU's LMS

JoondalupMount LawleySouth West (Bunbury)
Semester 213 x 2 hour labNot OfferedNot Offered
Semester 213 x 2 hour lectureNot OfferedNot Offered
Semester 213 x 1 hour tutorialNot OfferedNot Offered

For more information see the Semester Timetable

ONLINE

Students will engage in learning experiences via ECU’s LMS as well as additional ECU learning technologies

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

ON CAMPUS
TypeDescriptionValue
TestQuizzes/Tests30%
Laboratory WorkLaboratory performance and report20%
Examination ^End of semester examination50%
ONLINE
TypeDescriptionValue
TestQuizzes/Tests30%
ExerciseVirtual laboratory activities20%
Assignment ^Summative assessment of unit content50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS3190|4|2