School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.

  • Unit Title

    Communication Systems 1
  • Unit Code

    ENS3555
  • Year

    2022
  • Enrolment Period

    1
  • Version

    3
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
    Online
  • Unit Coordinator

    Dr Quoc Viet PHUNG

Description

This unit teaches the fundamentals of analog and digital communication systems. It provides an in-depth coverage of continuous wave modulation systems, with particular emphasis on the influence of noise on the performance of these systems. An introduction to digital modulation is also provided towards the end. For each modulation technique, the methods for generation and recovery of the signals arediscussed and performance comparisons are made between different implementations.

Prerequisite Rule

Students must pass 1 unit from ENS3341, ENS3553

Equivalent Rule

Unit was previously coded ENS3441

Learning Outcomes

On completion of this unit students should be able to:

  1. Analyse the operating principles of basic analog and digital communication systems.
  2. Apply mathematical techniques to evaluate performance parameters of communication systems.
  3. Identify the components of a communication system and describe their functions and engineering principles.

Unit Content

  1. Modulation techniques, baseband versus carrier communications, amplitude modulation and demodulation, angle modulation and demodulation, performance comparison of various AM, FM detectors.
  2. Performance analysis of continuous wave modulation systems in the presence of noise.
  3. Pulse modulation, bandwidth-noise trade off, pulse code modulation, noise consideration in pulse modulation, generation and detection of pulse modulated signals, time-division multiplexing.
  4. Spectral analysis, signal energy and energy spectral density, signal power and power spectral density, signal to noise ratio and noise figure with applications to antennas and communication links.

Learning Experience

ON-CAMPUS

Students will attend on campus classes as well as engage in learning activities through ECU's LMS

JoondalupMount LawleySouth West (Bunbury)
Semester 113 x 2 hour labNot OfferedNot Offered
Semester 113 x 2 hour lectureNot OfferedNot Offered
Semester 113 x 2 hour tutorialNot OfferedNot Offered

For more information see the Semester Timetable

ONLINE

Students will engage in learning experiences via ECU’s LMS as well as additional ECU learning technologies

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

ON CAMPUS
TypeDescriptionValue
TestIn-semester tests25%
Laboratory WorkLaboratory work and reports25%
Examination ^End of semester examination50%
ONLINE
TypeDescriptionValue
AssignmentOpen book take home test with viva component25%
ExerciseVirtual laboratory activity25%
Assignment ^Summative assessment of unit content50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS3555|3|1

School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.

  • Unit Title

    Communication Systems 1
  • Unit Code

    ENS3555
  • Year

    2022
  • Enrolment Period

    2
  • Version

    3
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
    Online
  • Unit Coordinator

    Dr Quoc Viet PHUNG

Description

This unit teaches the fundamentals of analog and digital communication systems. It provides an in-depth coverage of continuous wave modulation systems, with particular emphasis on the influence of noise on the performance of these systems. An introduction to digital modulation is also provided towards the end. For each modulation technique, the methods for generation and recovery of the signals arediscussed and performance comparisons are made between different implementations.

Prerequisite Rule

Students must pass 1 unit from ENS3341, ENS3553

Equivalent Rule

Unit was previously coded ENS3441

Learning Outcomes

On completion of this unit students should be able to:

  1. Analyse the operating principles of basic analog and digital communication systems.
  2. Apply mathematical techniques to evaluate performance parameters of communication systems.
  3. Identify the components of a communication system and describe their functions and engineering principles.

Unit Content

  1. Modulation techniques, baseband versus carrier communications, amplitude modulation and demodulation, angle modulation and demodulation, performance comparison of various AM, FM detectors.
  2. Performance analysis of continuous wave modulation systems in the presence of noise.
  3. Pulse modulation, bandwidth-noise trade off, pulse code modulation, noise consideration in pulse modulation, generation and detection of pulse modulated signals, time-division multiplexing.
  4. Spectral analysis, signal energy and energy spectral density, signal power and power spectral density, signal to noise ratio and noise figure with applications to antennas and communication links.

Learning Experience

ON-CAMPUS

Students will attend on campus classes as well as engage in learning activities through ECU's LMS

JoondalupMount LawleySouth West (Bunbury)
Semester 113 x 2 hour labNot OfferedNot Offered
Semester 113 x 2 hour lectureNot OfferedNot Offered
Semester 113 x 2 hour tutorialNot OfferedNot Offered

For more information see the Semester Timetable

ONLINE

Students will engage in learning experiences via ECU’s LMS as well as additional ECU learning technologies

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

ON CAMPUS
TypeDescriptionValue
TestIn-semester tests25%
Laboratory WorkLaboratory work and reports25%
Examination ^End of semester examination50%
ONLINE
TypeDescriptionValue
AssignmentOpen book take home test with viva component25%
ExerciseVirtual laboratory activity25%
Assignment ^Summative assessment of unit content50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS3555|3|2